# DSGE-BVAR model

**URL:** <https://forum.dynare.org/t/dsge-bvar-model/26845>\
**Category:** DSGE-VAR\
**Created:** [6 December 2024 07:25 UTC](https://forum.dynare.org/t/dsge-bvar-model/26845 "2024-12-06T07:25:14Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![ThaiTran](https://forum.dynare.org/user_avatar/forum.dynare.org/thaitran/32/20315_2.png) [@ThaiTran](https://forum.dynare.org/u/ThaiTran)\
**Post date:** [6 December 2024 07:25 UTC](https://forum.dynare.org/t/dsge-bvar-model/26845/1 "2024-12-06T07:25:14Z")

</div>

Hi,  
Can you help me with the error:  
Cannot use parameter values from calibration as they violate the prior bounds.Error using check\_prior\_bounds (line 38)  
Error using check\_prior\_bounds (line 38)  
Initial value(s) of SE\_eps\_delta\_q, SE\_eps\_z, SE\_eps\_y\_star, SE\_eps\_pi\_star are outside parameter  
bounds. Potentially, you should set prior\_trunc=0. If you used the mode\_file-option, check whether your  
mode-file is consistent with the priors.  
[test.mod](https://forum.dynare.org/uploads/short-url/wKbNsR9PCNl3gQRl1gxNaGesmVT.mod) (2.3 KB)

---

<div class="post-metadata">

**Author:** ![jpfeifer](https://forum.dynare.org/user_avatar/forum.dynare.org/jpfeifer/32/5044_2.png) [@jpfeifer](https://forum.dynare.org/u/jpfeifer)\
**Post date:** [6 December 2024 07:39 UTC](https://forum.dynare.org/t/dsge-bvar-model/26845/2 "2024-12-06T07:39:43Z")

</div>

There were various syntax issues in your model. Start from the attached file:  
[test5.mod](https://forum.dynare.org/uploads/short-url/5W0uptEHTXsdbaYzFMTlP5vO4KO.mod) (2.3 KB)  
Before you move to estimation, make sure a calibrated version of the model works. Currently, the Blanchard-Kahn conditions are not satisfied. That is often caused by timing error or another mistake in the model equations.

---

<div class="post-metadata">

**Author:** ![ThaiTran](https://forum.dynare.org/user_avatar/forum.dynare.org/thaitran/32/20315_2.png) [@ThaiTran](https://forum.dynare.org/u/ThaiTran)\
**Post date:** [9 December 2024 04:50 UTC](https://forum.dynare.org/t/dsge-bvar-model/26845/3 "2024-12-09T04:50:04Z")

</div>

Thank you so much for your help professor.

I’m new to the model and currently assigned to do the forecasting task and happenly knowing this method. Can you help me which part in my work is timing error in my model equation?

I’m looking forward to hearing from you

Sincerely yours

---

<div class="post-metadata">

**Author:** ![jpfeifer](https://forum.dynare.org/user_avatar/forum.dynare.org/jpfeifer/32/5044_2.png) [@jpfeifer](https://forum.dynare.org/u/jpfeifer)\
**Post date:** [11 December 2024 08:11 UTC](https://forum.dynare.org/t/dsge-bvar-model/26845/4 "2024-12-11T08:11:53Z")

</div>

I can only give you the generic advice: start from a smaller model that works.
