# Computing steady state bu there is a rank failure

**URL:** https://forum.dynare.org/t/computing-steady-state-bu-there-is-a-rank-failure/10925
**Category:** Stochastic simulations
**Created:** [26 October 2017 22:53 UTC](https://forum.dynare.org/t/computing-steady-state-bu-there-is-a-rank-failure/10925 "2017-10-26T22:53:17Z")
**Posts on this page:** 3
**Page:** 1

<div class="post-metadata">

### Author: ![wilmangomez](https://forum.dynare.org/letter_avatar_proxy/v4/letter/w/e274bd/32.png) [@wilmangomez](https://forum.dynare.org/u/wilmangomez)
#### Post date: [26 October 2017 22:53 UTC](https://forum.dynare.org/t/computing-steady-state-bu-there-is-a-rank-failure/10925/1 "2017-10-26T22:53:17Z")

</div>

Hi there!! Dyanre can correctly compute the steady state of my model, and there are as many eigen values greater than 1 as forward looking variables in the model, however Dynare says that: Blanchard Kahn conditions are not satisfied: indeterminacy due to rank failure.

Thanks for your very kind help.

W.

---

<div class="post-metadata">

### Author: ![jpfeifer](https://forum.dynare.org/user_avatar/forum.dynare.org/jpfeifer/32/5044_2.png) [@jpfeifer](https://forum.dynare.org/u/jpfeifer)
#### Post date: [28 October 2017 00:44 UTC](https://forum.dynare.org/t/computing-steady-state-bu-there-is-a-rank-failure/10925/2 "2017-10-28T00:44:25Z")

</div>

Run `model_diagnostics` and check the timing of your model

---

<div class="post-metadata">

### Author: ![wilmangomez](https://forum.dynare.org/letter_avatar_proxy/v4/letter/w/e274bd/32.png) [@wilmangomez](https://forum.dynare.org/u/wilmangomez)
#### Post date: [27 March 2018 20:52 UTC](https://forum.dynare.org/t/computing-steady-state-bu-there-is-a-rank-failure/10925/3 "2018-03-27T20:52:40Z")

</div>

Thanks Johanes, it worked very good.

bests.

W.